R&L Pet Supplies

This easy to do yourself system is the perfect alternative to expensive conventional fences. Also available is the Wire and Flag Accessory Kit (includes an extra 500 feet of boundary wire and 50 flags) to extend the coverage area of your system.

Keep your pet in the yard!

This easy, do-it-yourself system lets pets roam freely in the outdoor space you designate. The lightweight, 1.5 oz receiver collar fits necks 12 - 20 inches, and can operate up to six months on one set of batteries. The thorough how-to installation video also shows you how to properly install the system and train your pets.

Includes:

500 ft of wire (covers approx. 1/3 acre, additional boundary kits needed for areas over 1/2 acre)
50 flags
patented UltraLight receiver collar with short and long probes
adjustable transmitter
batteries
manual
video in DVD format.
General Info:

Will transmit up to 10 acres or 2,800 feet of wire
Boundary Control Switch Settings: A= Greater than 2,400, B= up to 1,300, C= 1,300-2,400 feet
One level of correction
Should be installed in a dry and protected environment
Boundary wire must be copper and must be insulated
Can easily use 14-20 gauge wire
Boundary Width is 20% Warning Zone and 80% Static Correction Zone
Transmitter Specs:

Height: 4.75"
Width: 4.25"
Depth: 2.10"
Frequency: 10.65 kHz Standard, 7kHz alternative available
Flip up front cover
Dark gray in color
Two red indicator lights (loop and power)
Wire break alarm
Two Boundary Wire terminals
Boundary Width Control Knob
ABC Boundary Control Switch
Adapter: Model number: RFA-14 (12v A/C, 830 ma)
Receiver Collar Specs:

Height: .75"
Width: 2"
Depth: .75"
Weight: 1.5 oz
Uses 6-volt (RFA-67) Battery
Waterproof
Interchangeable Contact Points (Long and Short)
Concave inside surface (side facing throat)
Curved washers to match concave surface
30 second safety timeout
Additional boundary wire:
PetSafe recommends the use of 20 gauge insulated multi-strand copper wire for direct burial. The following indicates the approximate length of boundary wire needed for a rectangular, single-loop layout. Length will vary due to the amount of twisted wire and layout used.

1/4 Acre: 415 feet of wire needed
1/3 Acre: 480 feet of wire needed
1/2 Acre: 590 feet of wire needed
1 Acre: 835 feet of wire needed
2 Acres: 1180 feet of wire needed
5 Acres: 1870 feet of wire needed
10 Acres: 2800 feet of wire needed
The Wire and Flag Accessory Kit includes an extra 500 feet of boundary wire and 50 flags.